Connect Tech CPU Manuel de service télécharger pdf (Page 180)

Configuration

CPU 317T: Technology Functions

4-104 A5E00251798-03

4.8.2 Configuration

In the Cams > Configuration dialog box, you can set the following items for the

"Cams" technology object:

• Output cam type: Position-based cams, time-based cams, or switching cams

• The system cycle in which the cam is calculated

• Reference values of the cam: setpoint or actual values

• Use of the cam as high-speed cam

Cams also take effect at non-homed axes.

Set the "Enable output" check box to assign a HW address and a logic operation to

the "Cam" technology object.

When output is disabled, the cam can be evaluated only in the software.

Pas de commentaire

Connect Tech CPU Manuel de service Page 180