Connect Tech NT960/PCI Manuel d'utilisateur télécharger pdf (Page 80)

4-28 Chapter 4: Appendix F - SLIM Insertion/Removal

Intellicon-NT960/PCI User's Manual, ver. 0.02

SLIM insertion

Figure 24 outlines the correct procedure for inserting an RS-232,

RS-485/422 and 20mA Current Loop Serial Line Interface

Module (SLIM).

Figure 24: SLIM insertion (ACM/Flex16)

Clip

Peg

Hole

1. Place the SLIM into the socket almost vertically (about 75-

degree angle), making sure that it is properly oriented and

fully inserted into the socket.

2. Press downward and sideways on the SLIM until it latches

into the socket. Do NOT force the SLIM, the installation

process requires a small force and should be very smooth and

easy. If you encounter resistance then re-check the orientation

and insertion depth.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Pas de commentaire

Connect Tech NT960/PCI Manuel d'utilisateur Page 80