Connect Tech NT960/PCI Manuel d'utilisateur télécharger pdf (Page 63)

Chapter 4: Appendix C - RS-232 Option 4-11

Intellicon-NT960/PCI User's Manual, ver. 0.02

Installation

The ACM/Flex16 module has four 72 pin SLIM sockets which

accept Serial Line Interface Modules. Each SLIM provides the

RS-232 or RS-485/422 or 20mA Current Loop receivers and

transmitters to condition four serial ports. SLIM 1 socket (SM1)

interfaces ports 1, 2, 3, 4; SLIM 2 socket (SM2) interfaces ports 5,

6, 7, 8; SLIM 3 socket (SM3) interfaces ports 9, 10, 11, 12; and

SLIM 4 socket (SM4) interfaces ports 13, 14, 15, 16. Please refer

to Figure 9 for the location of the SLIM sockets and to Appendix

F: SLIM Insertion/Removal for the proper procedures to

installing and removing SLIMs.

Your ACM/Flex16 and Serial Line Interface Module (SLIM) are

very sensitive to static electricity. Make sure that before you

remove them from the anti-static shipping bag, you wear an anti-

static wristband. When you remove them from the anti-static bag,

handle them only by the edges and place them on the anti-static

bag or an anti-static mat.

LED interface indicators

You can install RS-232 and/or RS-485/422 and/or 20mA Current

Loop Serial Line Interface Modules in your ACM/Flex 16. The

ACM/Flex16 has LED indicators on its front panel to show you

the electrical interface in use for a specific group of four ports.

When the LED is red the RS-485/422 interface is in use; when it

is green the RS-232 interface is in use; and when it is amber the

20mA Current Loop interface is in use. Please refer to Figure 10

for the location of these LED interface indicators.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 87 88

Pas de commentaire

Connect Tech NT960/PCI Manuel d'utilisateur Page 63