Connect Tech FREE FORM/PCI-104 104 Manuel d'utilisateur télécharger pdf (Page 28)

Connect Tech FreeForm/PCI-104 User Manual

Revision 0.07 28

6) Right click on the flash and perform a blank check.

7) If the part is blank you will see:

INFO:iMPACT - Current time: 2013-03-25 3:24:31 PM

// *** BATCH CMD : BlankCheck -p 1 -spionly

PROGRESS_START - Starting Operation.

Maximum TCK operating frequency for this device chain: 10000000.

Validating chain...

Boundary-scan chain validated successfully.

1: Device Temperature: Current Reading: -273.00 C

1: VCCINT Supply: Current Reading: 0.000 V

1: VCCAUX Supply: Current Reading: 0.000 V

'1': IDCODE is '202016' (in hex).

'1': ID Check passed.

'1': IDCODE is '202016' (in hex).

'1': ID Check passed.

'1': Performing blank check on device...

'1': Part is blank.

PROGRESS_END - End Operation.

Elapsed time = 65 sec.

8) Right click on the flash and click ‘Program’

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Pas de commentaire

Connect Tech FREE FORM/PCI-104 104 Manuel d'utilisateur Page 28