Connect Tech Echo/ISA Guide de l'utilisateur télécharger pdf (Page 16)

16 MultiModem ZPX User Guide

11. Select the country in which the modem will be used and then click Next.

12. Review your choice of country. If it is correct, click Next to configure the modem.

13. Click Finish to exit.

ATCommands

Non-Windows users can configure the modem using AT commands. You must enter these commands in

your communication program’s terminal window. There is a separate document of AT Commands on the

Multi-Tech Systems Installation Resources Website at www.multitech.com/setup/product.go.

1. Run your favorite communication program, and open the program’s terminal window.

2. To configure the modem for a specific country, type AT%T19,0,nn, where nn is the country

code in hexadecimal notation, and press Enter.

3. To verify the change, type ATI9 and press Enter. The country code is displayed in decimal

format. www.multitech.com/setup/product.go.

Example of country, command and result codes

Country AT command Result code

(hexadecimal) (decimal)

Euro/NAM AT%T19,0,34 (default) 52

Japan AT%T19,0,10 16

A complete list of country codes can be found on the Multi-Tech Web site at

http://www.multitech.com/en_US/PRODUCTS/Categories/Device_Networking/global_modems/

configuration.aspx.

Chapter 2 - Installation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Pas de commentaire

Connect Tech Echo/ISA Guide de l'utilisateur Page 16