Connect-tech PCI-104 Manuel d'utilisateur télécharger pdf (Page 29)

Connect Tech FreeForm/PCI-104 User Manual

Revision 0.02 29

Configuring the FPGA with the SPI Flash

In previous Xilinx FPGA configurations, the SPI flash required programming via 3

party JTAG test

software or through in-system methods. The following features are new to ISE 9.1/9.2, and are only

available on select FPGAs, including the Virtex-5. Your FreeForm/PCI-104 card featuring the Xilinx

Virtex-5 FPGA includes a standard core to enable programming of BPI and SPI flashes over JTAG.

Configuring the FPGA / SPI flash Association

1) Select “Boundary Scan” from the “Flows” tab.

2) Right click on the FPGA and select “Add SPI Flash…”

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

Pas de commentaire

Connect-tech PCI-104 Manuel d'utilisateur Page 29